VeloStone™ Palissandro Flexible Natural Stone Wall Panel - 290cmx122cm

VeloStone™ brings the beauty of natural stone into a new, lightweight wall panel. We take real marble and slice it into thin layers, creating a stone sheet that’s effortless to work with.

Our Palissandro Stone is sourced from quarries in Greece, featuring genuine marble patterns that make every sheet one of a kind. Lightweight, waterproof, and suitable for interiors or exteriors, it brings the magic of real stone into any home. 

• Natural Marble from Greece – Real stone sourced from quarries in Greece. Each sheet has its own unique pattern.

• Thin & Lightweight – Typically 1.5–2mm, making installation and handling simple.

• Flexible Backing – Made from fiberglass backing for strength, bendability, and easy application.

• Durable & Waterproof –  Crafted from real marble, it’s waterproof and built to last

• Versatile – Ideal for kitchens, bathrooms, feature walls, furniture, ceilings, and exterior spaces.

Size: 2900mm (H) x 1220mm (W)

Thickness: 1.5mm - 3mm

Weight: 6-7kg per sheet

Natural Stone Construction

Please note each sheet is unique due to the natural variations in the stone.

✅ 1. Prepare the Surface

To ensure strong adhesion, the wall surface must be:

• Clean, dry, and free of dust, oils, or loose paint
• Flat and structurally sound
• Indoor walls: plasterboard, cement board, brick, or rendered surfaces
• Outdoor walls: concrete, brick, or masonry
  

Tip: Proper surface preparation is the most important step for a long-lasting VeloStone™ finish.

✅ 2. Plan & Dry-Lay Your Panels

Before applying adhesive:

• Lay out several VeloStone™ panels on the floor
• Mix panels from different boxes for natural colour variation
• Plan your layout and start from the bottom of the wall
• Ensure your first row is perfectly level
  

✅ 3. Use the Recommended Adhesive

For VeloStone panels, we recommend:

• T-Rex Floor & Wall adhesive suitable for both indoor and outdoor use.

How to apply it:

• Spread adhesive using a notched trowel on the back of the panel.
  

✅ 4. Install the Panels (Bottom Up)

• Start at the bottom corner of your wall
• Press each VeloStone™ panel firmly into the adhesive
• Tap lightly using a rubber mallet to bed it into place
• Maintain a staggered layout to avoid long vertical seams
• Always check your level as you go

VeloStone™ panels are designed for a tight, dry-stacked look—no grouting needed.

✅ 5. Cutting the Panels

If you need to trim pieces:

• Use a wet saw with a diamond blade for clean, precise cuts
• An angle grinder with a diamond blade also works for smaller adjustments
• Wear protective gear (mask, goggles, gloves.

✅ 6. Continue Up the Wall

• Work evenly across each row
• Mix panels to balance colour tones
• Check alignment frequently
• Remove any adhesive squeeze-out immediately
  

✅ 7. Seal the Panels

Sealing is recommended for:

• Kitchens
• Bathrooms
• Outdoor installations
• High-traffic or high-moisture areas

Use a natural stone sealer once the adhesive has fully cured (24–48 hours)

Recommended product: https://www.sealersonline.com.au/products/enhance-n-seal?variant=39325554769993

Applying the sealant guide: https://www.youtube.com/watch?v=Sq48o81s3Mw&list=TLGGgVoQ3pV5vg4xNjEyMjAyNQ&t=5s

✅ 8. Cleaning

• Use a soft brush or damp sponge
• Avoid harsh chemicals or abrasive scrubbing.

Note:

- When applying adhesive, ensure to remain 5mm from the edge of the sheet.

- Lay each sheet flat for 24 hours.

- Strongly recommend natural water based sealant to protect from minor chips, oil, stains, food and grime.

Enjoy flat-rate shipping with Australia-wide delivery on all orders.

Flat-rate shipping for orders are as below:

• NSW $99.00
• ACT $119.00
• QLD $139.00
• VIC $139.00
• WA $199.00
• SA $249.00
• TAS $299.00